Dr. Shaun Duke, Professional Nerd

Editor. Writer. Professor. Host.

Reading Time

Reader Question: What is the best way to explain foreign technology in science fiction?

This question was sent to me anonymously via my Formspring profile. After thinking about it for a while, I’ve come to the realization that it’s not exactly an easy one to answer. There are no hard-set rules for how to deal with description and explanation in fiction, particularly in science fiction. People try to say that there are, but any time someone comes up with a writing rule that is rigid and absolute, rather than usually right, but reasonably flexible, you should know you’re dealing with a bad piece of advice. “Show, don’t tell,” for example, is not absolute, yet it is told as if it is. This question is very much related to that, and I’m going to try to answer it based on my experience as a writer and as a reader, since what works and doesn’t work is, for me, tied up in both.

Explaining technology, specifically technology that is foreign to the reader, is not an easy task primarily because how you can or should explain will depend very much on the situation. For example, typically one explains something in one of the following three ways:

–Telling It
Literally writing “it does this,” but, preferably, in more eloquent prose.

–Showing It
Describing the thing in action. For example, instead of saying how a toaster works, the author would simply show it doing what it was designed to do. A simple example, but the point easily applies to anything else.

–By Comparison
You can apply comparison to “telling” or “showing.” By using a comparison you are essentially saying that your new-fangled thing is similar to this old thing, but different because of X, Y, and Z, perhaps implicitly or explicitly.

All three of these types have their place in science fiction (and fiction in general), and any writer can make all of them work. While the universal rule has always been “show, don’t tell,” trying to show too much can be just as annoying as trying to tell too much. It’s a balance issue.

If you have a new technology present in a scene, but have no reason to show that thing in action (perhaps because it isn’t integral to the plot), then you should avoid telling or showing it at all. But if you need the main character to know what something does before s/he uses it, then you can’t avoid telling the audience what’s what. The rule about telling really should be: use it sparingly. If you can show it, then do so. If you can’t without bogging down the story, then don’t. “Show, don’t tell” really only applies in its most rigid sense when you are talking about action. You always want to avoid telling in action. You can bring in emotions and brief snippets of things, but the reason why writers say to avoid telling is because it typically bogs down action, which is not a good thing when you want your reader to be engrossed in what is going on.

The last from the list above is one that gets used from time to time, but never really discussed. Depending on the situation, using a comparison is very much a form of telling, but it can be done in a way that a) doesn’t bog down the story, and b) keeps things brief and to the point. For example, instead of describing how a futuristic printing press works, you can simply make a comparison between the presses of today and note, briefly, the differences (similes and metaphors are a must). Simpler versions use old terms with a modifier (laser toaster; you know what it does and how just by the title–a ridiculous example, sure, but it gets the point across). This method isn’t used often and really doesn’t apply to very complicated processes or systems, particularly if your audience doesn’t know those systems, but it can be very effective.

Ultimately, if you don’t have to tell how something works, or even describe it, then don’t. If there’s no reason for it, then that’s really the only response you should have. If you do have to describe something, however, then consider how it would be best to do so; the more complicated of a system/process it is, the less likely you can reduce it to an info-dump without pulling your readers out of the story. This applies to all forms of fiction.

In the end, the best way to deal with this is to come to terms with whether you have to describe it. Don’t waste space doing something you don’t need to do.

What about you? If you’ve found ways to deal with this, let me know in the comments!

————————————-

If you’d like to ask me a question about science fiction, fantasy, books, writing, or whatever (anonymously, even), feel free to ask on my Formspring page.

Email
Facebook
Twitter
LinkedIn
Digg
Reddit
LinkedIn

Get My Newsletter!

Subscribe (RSS)

Support Me

Recent Posts

Top Posts

Archives
%d bloggers like this: